High brightness 50W Flat LEDPanel Light 60 x 60 with Suspended Mounted

60 x 60cm 50W LED Flat Panel Lighting for home , hotel , office,hospital, high grade application.


Description:

Bellaid flat LED panel is a well-designed & easy to retrofit replacement for standard ceiling tile fittings( ceiling troffer fixture )widely used in offices,hospitals and other professional locales.
Our company LED panel has an outstanding luminous efficacy of 95lm/w achieved by utilizing ultra-bright SMD leds in tandem with Japanese-design reflective materials.
Thanks to its good sink design , Bellaid LED panel has unbelievable low in situation temperature 33℃,Calculated LM70 lifetime is 66,000h.


Product Specifications:

Construction & materials:

Environmental system

Optical system

Electrical system

Features

Save up to 60% energy usage compared to traditional fluorescent fittings.
Optional built in, surface and suspension mounting kits available.
Class II
High Lumen output
Long life of 40,000h
Slim profile design
Instant start
Negligible UV output
Mercury free

Photometric Information


4000K 6000K



Distribution curve flux:



Illuminance demo:


User Guide Note:

Pls read the entire manual to fully understand and safe usely use this product.
The products anc be used at voltage of 100-277Vac,50/60Hz,suitable for indoor dry environment.
Specifications are subject to change without notice.pls visit www.LED-Panel-lights.com for the most recent user guide versions.


Unpacking

• Unpack and careful examine the product.
• Report any damage and save all packing material if any parts were damaged during transportation
• Do not attempt to use this apparatus if it is damaged.

Installation instructions


1) Pls remove the protection film on the front of luminaire

• Consult a qualified electrician to ensure correct branch circuit conductor.
• The products should be installed and operated by qualified electrician or technician in accordance
• with relevant local codes.
• Rish of electric shock,ensure that main power source is off when wiring or soldering the sections of
• the product.

Maintenance

• Prior to cleaning the product,make sure it has been disconnected from power supply.
• Use a dry or slightly moistened cloth for cleaning
• Never use any chemical or abrasive materials for cleaning.

Installation considerations

• The product must be at a minimum distance of 20cm from any flammable material.
• The product must not be installed into ceilings or wall that contain heat-insulating materials.

Installation steps

• Built-in

• Turn off main power before wring.
• Remove the ceiling panel
• Connect the input and ground wires(bare end) of the driver box to the main power outlet.
• Connect male-female connector tightly on the panel and driver.
• Fix the flat led panel into the ceiling.

slim led panel light

flat panel led lights

High brightness 50W Flat LEDPanel Light 60 x 60 with Suspended Mounted Images